How to effectively prevent crusher jamming

1. Lubricating oil not up to standard

Excessive or insufficient lubricating oil, as well as contamination and deterioration, can affect the lubrication effect of the equipment, thereby reducing the speed of the equipment and reducing its crushing effect. Materials accumulate in the crushing chamber and are difficult to discharge, resulting in blockage.

2. Wear and tear of vulnerable parts

Wear and tear of vulnerable parts can cause excessive crushing of materials, resulting in poor feeding during the screening process, which can easily cause blockage of the crusher.

3. Excessive feeding speed

The feeding speed is too fast, and the crusher cannot come in time. If the feeding is uneven and the speed is too fast during the crushing process, the material in the crushing chamber will not be discharged in time, which will cause serious blockage of the equipment.

4. The discharge port is not unobstructed

Crushers are generally installed at a relatively high height, with a conveyor placed underneath, and some materials may fall under the conveyor. If there is a large accumulation of materials under the conveyor, it will seriously affect the normal discharge of the crusher.

5. Rust and blockage on the leakage plate

The leakage plate under the crusher has problems such as rust and blockage, resulting in slow discharge and further blockage of the crusher.

6. Voltage instability

When the equipment is broken, the voltage is unstable, and the crusher cannot reach normal speed, which can easily cause equipment blockage

7. Material too large

Excessive crushing of materials can cause severe wear and tear on various components of the equipment, leading to blockage over time. Once the crusher is blocked, it will affect future use and work efficiency. Therefore, when using it in daily life, it is necessary to pay attention to the usage method to ensure that the equipment can be used normally.

When the above situation occurs, immediately stop feeding, cut off the power supply, identify the cause of the blockage, and solve it.